End Yokes

Filters: STYLE = CV,

PART NUMBER	SERIES	SPLINE COUNT	SPLINE DIA.	HUB DIA.	THRU HOLE	C/L TO END	STYLE	DIFF MODEL	NOTES	VEHICLE CLASS	BRAND
N2-4-4061X	1310	10	1.125	1.552	1.500	3.000	CV		Common TC yoke for early 10 spline applications. Counterbore 0.311", Slinger 330699	LD	Neapco
2-4-4021X	1310	10	1.250	1.750	2.000	3.375	CV			LD	Spicer
2-4-5091	1310	21	1.403	1.875	1.562	3.000	CV			LD	Spicer
2-4-6221	1330	21	1.403	1.906	1.719	3.594	CV			LD	Spicer
2-4-4341	1310	26	1.146	1.552	1.500	3.000	CV			LD	Spicer
3104-26CV	1310	26	1.146	1.552	1.500	3.000	CV			LD	PTI
3104-262CV	1310	26	1.146	1.614	1.500	3.000	CV	DODGE/JEEP FRONT TC	CV Conversion Yoke, Splines counterbored on bottom, Includes hub sleeve	LD	PTI
3104-261CV	1310	26	1.146	1.453	1.500	3.000	CV	0	CV style midship end yoke used to bolt up a open socket style CV head to a center section.	LD	PTI
2-4-5441	1330	32	1.401	1.875	2.000	3.875	CV		Discontinued by Dana 04/2018	LD	Spicer
3104-321CV	1310	32	1.401	1.943	2.000	3.875	CV		CV conversion yoke for 07 and up Jeep JK on front or rear output, Splines counterbored top and bottom, Includes hub sleeve	LD	PTI
3104-322CV	1310	32	1.401	1.943	2.000	3.875	CV		03-06 Jeep Rubicon with 241 transfer case	LD	PTI
3104-32CV	1310	32	1.401	1.875	2.000	3.875	CV	TC NP 203/205	Same as 2-4-5341, Counterbored 0.30"	LD	PTI
N2-4-5341	1310	32	1.401	1.880	2.000	3.880	CV		Joint Angle 13 degrees	LD	Neapco
10016266	1310	32	1.401	1.943	2.000	4.000	CV	Dana 44	07-18 Ultimate Dana 44 Front Axle, Converts Transmission Companion Flange to End Yoke	LD	Spicer

Parts by Type